Arc Length Calculator

Calculate the arc length of a circle easily
```
Result will appear here
```

Introduction

A straight line is easy to measure: you lay a ruler along it. A curve is harder. The rim of a wheel, the edge of a circular table, the bend in a pipe or the path of a planet around the sun are all curves, and measuring them by hand means wrapping a tape around the bend and hoping it does not slip. This Arc Length Calculator measures the length of a curve on a circle from just two numbers, the radius and the angle, so you can get an exact length without a tape measure.

It is made for students learning geometry, teachers setting homework, engineers and builders working with curved parts, and anyone who works with circles. You enter the radius and the angle in degrees, and the calculator gives the arc length at once.

What is Arc Length?

Arc length is the distance along the curved edge of a circle between two points. An arc is a part of the circumference of a circle, cut off by a central angle. The larger the circle, the longer the arc for the same angle, and the larger the angle, the longer the arc for the same circle.

A full circle is 360 degrees, and its circumference is 2 times pi times the radius. An arc that covers 90 degrees, one quarter of the circle, is one quarter of the circumference. An arc that covers 180 degrees, half the circle, is half the circumference. Arc length is how far you would travel if you walked along the rim of the circle from one point to the other.

How to Use the Arc Length Calculator

Follow these steps to find an arc length:

  1. Enter the radius of the circle.
  2. Enter the angle in degrees, the central angle that cuts off the arc.
  3. Click Calculate Arc Length to see the result.

Use the same unit for the radius and the result: if you enter the radius in centimetres, the arc length comes out in centimetres. Enter the angle in degrees, not radians, because the calculator converts degrees to radians for you. The angle must be between 0 and 360 degrees, and the radius must be a positive number.

The Arc Length Formula

The calculator uses the standard formula:

Arc Length = Radius x Angle in Radians

Since the tool takes the angle in degrees, it converts it first: angle in radians = angle in degrees x pi divided by 180. So the working formula is:

Arc Length = Radius x Angle in Degrees x pi / 180

Here pi is about 3.14159. A full circle of 360 degrees gives radius x 360 x pi / 180 = 2 x pi x radius, which is the circumference, exactly as it should be.

Worked Example

Take a circle with a radius of 10 and a central angle of 90 degrees.

First convert the angle to radians: 90 x pi / 180 = pi / 2, which is about 1.5708. Then multiply by the radius: 10 x 1.5708 = 15.708.

So the arc length is 15.7080, which is exactly what the calculator shows for these inputs. That is one quarter of the full circumference, 2 x pi x 10 = 62.832, which makes sense because 90 degrees is one quarter of 360.

When to Use It and Tips

Use this calculator for geometry homework, for sizing curved parts such as pipes, arches and wheels, for working out how far a point on a rotating wheel travels, and for checking the length of a curved edge before cutting material. It is also useful when you only know the radius and the angle, and the circle itself is too large to measure directly.

  • Double check that the angle is in degrees, because using radians by mistake gives a much larger answer.
  • Use the radius, not the diameter. The radius is half the diameter, so using the diameter doubles the answer.
  • Keep the units the same for radius and arc length, and convert afterwards if you need a different unit.
  • For a small angle, sanity check the answer: it should be much smaller than the full circumference.

An arc is measured from the centre of its circle, and the Centroid Calculator finds the centre point of a shape, which is the starting point for radius measurements. For a straight distance in another unit, the Pixels to Inches Calculator converts a screen measurement into inches.

Arc length calculator with a radius of 10 and an angle of 15 degrees giving an arc length of 2.6180

FAQs

Q1: What is arc length?

Arc length is the distance measured along the curved edge of a circle between two points. An arc is a part of the circumference, cut off by the central angle at the centre of the circle.

Q2: Does this calculator use degrees or radians?

It accepts angles in degrees and converts them into radians automatically. Enter the angle in degrees, such as 90, not in radians.

Q3: Is this arc length calculator free to use?

Yes, it is completely free and does not require registration or sign up. You can calculate as many arcs as you like.

Q4: Can I use this calculator on my phone?

Yes, the calculator is fully responsive and works on mobile, tablet and desktop.

Q5: Are the results accurate?

Yes. The calculator uses the standard arc length formula, arc length = radius x angle in radians, and gives the exact result for the radius and angle you enter. Check that you entered the radius, not the diameter, and the angle in degrees.

Q6: What if my angle is in radians?

Convert it to degrees first: degrees = radians x 180 / pi. A half turn, pi radians, is 180 degrees, and a quarter turn, pi/2 radians, is 90 degrees.

Disclaimer

Disclaimer: This calculator is for educational and informational purposes only. It works out an arc length from the radius and angle you enter, and it assumes a perfect circle. Always check the result with your own measurements before cutting material or building, because a wrong radius or angle gives a wrong length.