Fence Calculator

Results appear here

Fence Calculator – Fast and Simple Fence Area Calculation

Introduction

A fence is one of the first things people see when they arrive at your home, and it is also one of the easiest projects to get wrong on materials. Order too few boards or panels and the job stops halfway. Order too many and you have paid for timber that sits in the garage. The hardest part is working out how much fence you actually need, because a fence is not bought by length alone, it is bought by area. This Fence Calculator works out the total area of a fence from its length and height, so you can plan materials, compare quotes and budget with confidence.

It is made for homeowners, landscapers and contractors planning garden fences, backyard enclosures and commercial property boundaries. You enter the length and height of the fence, choose metres, feet or inches, and the calculator gives the area at once.

What is Fence Area?

Fence area is the surface area of the fence face, the size of the wall of boards, panels or mesh that makes up the fence. It is found by multiplying the fence length by its height, just as you would find the area of any rectangle. The unit is a square unit: square metres if you measured in metres, square feet if you measured in feet, and square inches if you measured in inches.

Area is what matters when you buy materials, because boards, panels, mesh and paint are sold and costed by area, not by length alone. A fence 20 metres long and 2 metres high has an area of 40 square metres, and that number tells you how much material covers it. It also helps when you compare quotes: two fences of the same length can cost very different amounts if one is taller than the other, and area is the fair basis for comparing them.

This calculator works for a single straight run and for a fence of several runs added together. For a fence that is not a simple rectangle, such as one that steps up a slope, split it into sections, work out each section’s area, and add them up.

How to Use the Fence Calculator

Fence Calculator Tool for Accurate Measurements

Follow these steps to work out the area of your fence:

  1. Enter the Fence Length, the total length of the fence run, for example 20.
  2. Enter the Fence Height, the height of the fence from the ground to the top, for example 2.
  3. Choose the Unit: Meters, Feet or Inches. Use the same unit for length and height.
  4. Click Calculate to see the Total Fence Area in square metres, square feet or square inches.

Measure the length along the ground, following the line of the fence, and measure the height at the fence itself. If your fence runs in several straight sections, add the section lengths together first, or calculate each section separately and add the areas.

Formula and Worked Example

The Fence Area Formula

The calculator uses the area of a rectangle:

Fence Area = Fence Length x Fence Height

The result is in square units: square metres if you measured in metres, square feet if you measured in feet, and square inches if you measured in inches. To convert, 1 square metre is about 10.764 square feet, and 1 square foot is 144 square inches.

Worked Example

Take a fence 20 metres long and 2 metres high, a typical garden fence.

Multiply the length by the height: 20 x 2 = 40.

So the total fence area is 40 meters squared, which is exactly what the calculator shows for these inputs. If you wanted the same area in square feet, 40 x 10.764 = 430.56 square feet.

When to Use It and Tips

Use this calculator when you are planning a new fence, costing a replacement, ordering panels or boards, or comparing quotes from fencing companies. It is also useful when you are painting or staining a fence, because the paint you need is sold by area, and when you are budgeting for a garden project.

  • Measure in the same unit for length and height, and measure the height at the fence, not the ground slope.
  • Add 5 to 10 percent extra material for cuts, damage and mistakes, especially on a long run.
  • For a fence on a slope, measure each section separately and add the areas together.
  • Remember that this calculator gives the area of one face of the fence. If you are painting both sides, double it.
  • Check your boundary line and local rules before you build, as fence heights are often regulated.

Fence posts stand in footings, so once you know the fence area, the Footing Calculator can work out the concrete each post footing needs. If your fence runs under a roof or a pergola, the Rafter Length Calculator can help you plan the structure above it.

FAQs

1. What units does the Fence Calculator support?

It supports metres, feet and inches. Choose the unit in the Unit dropdown, and use the same unit for length and height, so the area comes out in square metres, square feet or square inches.

2. Can I use it for irregular fence shapes?

Yes, for fences that are not one straight rectangle, divide the fence into straight sections and calculate each section separately, then add the areas together. For a fence stepping up a slope, measure each step as its own rectangle.

3. Is this calculator free to use?

Yes, it is completely free to use and needs no sign up or account. You can calculate as many fences as you like.

4. Can it help estimate fencing materials?

Yes. The area tells you how much material covers the fence, so you can work out panels, boards, mesh or paint from it. Add 5 to 10 percent extra for cuts, damage and mistakes, and remember posts and concrete are counted separately.

5. Does it require registration?

No registration is needed. Just enter your measurements, choose a unit, and click Calculate.

Disclaimer

Disclaimer: This calculator is for educational and informational purposes only and gives an estimate of fence area. Actual material needs depend on the fence design, panel sizes, ground conditions and local rules. Always confirm measurements on site and check with your supplier or a fencing professional before ordering.