Decomposed Granite Calculator

Decomposed Granite Calculator

Find out how much decomposed granite you need for a path, patio, garden bed or driveway. Get cubic yards, tons, bags, coverage and an optional cost estimate, with compaction and waste included.

Area to cover

Depth and material

DG packs down when it is compacted, so the amount you order is higher than the finished volume. Most projects use 10 to 20 percent for compaction and a few percent for waste.

Optional: cost estimate

Decomposed Granite Calculator: Calculate DG Needed in Tons, Yards, and Bags

Need to cover a pathway, patio, garden bed, or driveway with decomposed granite? This Decomposed Granite Calculator helps you estimate how much material your project requires. Enter your area measurements and desired depth to calculate cubic yards, weight in tons, estimated bags, and optional material costs.

You can calculate the amount needed for multiple areas, choose between US and metric measurements, and include extra material for compaction and waste. If you already have decomposed granite, you can also estimate how much ground it will cover.

Whether you are ordering bulk decomposed granite or buying bags from a local supplier, this calculator gives you a practical starting estimate before purchasing.

How to Use the Decomposed Granite Calculator

The calculator is designed to make material estimates straightforward. You do not need to work through the volume and weight formulas yourself.

Follow these steps to get your estimate.

1. Choose What You Want to Calculate

Start by selecting one of the two calculation options:

  • How much DG do I need: Choose this option when you know the area and want to calculate the amount of decomposed granite to order.
  • How much area will my DG cover: Choose this when you already have a certain amount of material and want to know how much ground it can cover.

2. Select Your Measurement Units

Choose US or metric measurements based on your project.

The US option uses feet, inches, pounds, and tons. The metric option uses meters, centimeters, kilograms, and tonnes.

The calculator adjusts the measurement fields and results automatically when you change the unit system.

3. Enter Your Project Area

Add the dimensions of the area you want to cover. You can calculate several separate areas and combine them into one material estimate.

Choose the shape that matches your project:

  • Rectangle: Enter the length and width.
  • Circle: Enter the diameter of the circular area.
  • Known area: Enter the total square footage or square meters if you already know the area.

Use the Add Another Area option if your project includes multiple paths, garden beds, or sections of a patio.

If you liked this tool, you may also want to explore this tool. Click below to give it a try!

 

4. Choose the Desired Depth

Enter how deep you want the decomposed granite layer to be.

The calculator includes suggested depths for different project types, such as top dressing, garden beds, walking paths, high traffic areas, and driveways.

These are starting suggestions rather than fixed construction requirements. Your final depth should depend on the intended use, existing surface, soil conditions, and whether you have a properly prepared base.

5. Select the DG Density

Decomposed granite does not always have the same weight. Its density can vary depending on the material, particle composition, moisture, and how it is processed.

The calculator provides typical density options, along with an option to enter a custom density supplied by your material provider.

For a general estimate, it uses approximately 90 pounds per cubic foot, equivalent to 2,430 pounds per cubic yard.

If your supplier provides a different density, use that figure for a more accurate weight estimate.

6. Include Compaction and Waste

Decomposed granite settles when compacted. You may also lose some material during transportation, spreading, and installation.

The calculator lets you enter separate percentages for:

  • Compaction allowance
  • Waste and spillage

For example, a 15% compaction allowance and 5% waste allowance are applied separately. The calculator multiplies the finished volume by both allowance factors.

7. Calculate Your Material and Cost

Select Calculate to see your estimated quantity.

The results include the finished volume, amount to order, estimated weight, and number of bags based on your selected bag size.

You can also expand the optional cost estimate section to enter the price per ton, cubic yard, or bag. Add delivery charges and material sales tax if applicable to estimate your total cost.

How Much Decomposed Granite Do I Need?

The amount of decomposed granite depends mainly on three measurements: the total area, the finished depth, and the material density.

A larger area requires more material. Increasing the depth also increases the required volume and weight.

For example, a rectangular pathway measuring 7 feet long and 9 feet wide has an area of 63 square feet.

If you want a finished layer that is 1 inch deep, the volume is:

63 × (1 ÷ 12) = 5.25 cubic feet

To convert cubic feet into cubic yards, divide by 27:

5.25 ÷ 27 = 0.1944 cubic yards

This is the finished volume before adding compaction and waste allowances.

With a 15% compaction allowance and 5% waste allowance, the estimated order volume becomes approximately 0.235 cubic yards.

At a density of 90 pounds per cubic foot, that is approximately 570 pounds of material, or 0.285 US tons.

If you purchase 50 pound bags, you would need to round up to 12 bags.

IF you like this tool than visit our calculator page to see more Interesting and Entertaining Tool

Decomposed Granite Calculation Formula

You can estimate the amount of decomposed granite using a few straightforward formulas. The calculator performs these steps automatically.

Step 1: Calculate the Area

For a rectangular project:

Area = Length × Width

For example:

7 feet × 9 feet = 63 square feet

For a circular area:

Area = π × (Diameter ÷ 2)²

If you already know the total area, enter that figure directly.

Step 2: Convert Depth into Feet

When using US measurements, convert inches into feet:

Depth in Feet = Depth in Inches ÷ 12

For a 1 inch layer:

1 ÷ 12 = 0.0833 feet

For metric measurements, convert centimeters into meters by dividing the depth by 100.

Step 3: Calculate Cubic Feet

Multiply the area by the depth in feet:

Cubic Feet = Square Feet × Depth in Feet

For the 63 square foot example:

63 × 0.0833 = 5.25 cubic feet

Step 4: Convert Cubic Feet into Cubic Yards

One cubic yard contains 27 cubic feet.

Cubic Yards = Cubic Feet ÷ 27

Therefore:

5.25 ÷ 27 = 0.1944 cubic yards

Step 5: Add Compaction and Waste Allowances

The finished volume is not necessarily the same as the amount you should order.

Use this formula:

Order Volume = Finished Volume × (1 + Compaction Percentage) × (1 + Waste Percentage)

Convert each percentage into a decimal before calculating.

For 15% compaction and 5% waste:

0.1944 × 1.15 × 1.05 = approximately 0.2347 cubic yards

Step 6: Calculate the Weight

Once you know the order volume, multiply it by the material density.

Weight = Order Volume × Density

Using a typical density of 90 pounds per cubic foot:

0.2347 cubic yards × 27 × 90 = approximately 570 pounds

To convert pounds into US short tons:

Tons = Pounds ÷ 2,000

570 ÷ 2,000 = approximately 0.285 tons

The calculator uses the same basic volume and weight principles for metric measurements.

Decomposed Granite Coverage Per Ton

The coverage of one ton depends on the selected depth and the material density.

A thinner layer covers more ground, while a deeper layer requires more material for the same area.

The following estimates use a density of approximately 90 pounds per cubic foot, with 15% compaction and 5% waste included.

Finished depth Approximate coverage per US ton
1 inch 221 square feet
2 inches 110 square feet
3 inches 74 square feet
4 inches 55 square feet

These figures are estimates, not guaranteed supplier coverage. Actual coverage can change with material density, moisture, installation method, and ground conditions.

Use the calculator with your supplier’s density and your preferred allowances to get an estimate for your project.

How Many Bags of Decomposed Granite Do You Need?

Bag quantity depends on the total weight required and the weight printed on each bag.

The formula is:

Number of Bags = Required Weight ÷ Weight per Bag

Always round the result up because you cannot purchase a fraction of a bag.

For example, if your project requires 570 pounds of decomposed granite and each bag weighs 50 pounds:

570 ÷ 50 = 11.4 bags

You should purchase 12 bags.

If you are buying 40 pound bags instead, you will need 15 bags for the same estimated quantity.

Bulk material may be more practical for larger projects, while bags can be convenient for small garden beds and repairs.

How Deep Should Decomposed Granite Be?

The right depth depends on the purpose of your project and the surface underneath it.

Top Dressing

A thin layer can refresh an existing surface or improve the appearance of a garden area. A depth around 1 inch may be suitable for some top dressing projects when the existing base is already stable.

Garden Beds and Ground Cover

A garden bed may use a layer around 2 inches deep, depending on the desired appearance and existing ground conditions.

Walking Paths and Patios

A walking path or patio generally needs more preparation than a decorative top dressing. A depth around 2 inches can be a starting estimate, but the correct installation depends on the base, drainage, and whether the material will be compacted.

High Traffic Paths and Pet Runs

Areas with frequent foot traffic may require a deeper layer and a well prepared base. Around 3 inches can be used as an initial planning figure, subject to site conditions.

Driveways

Driveways need particular attention because vehicles place more pressure on the surface. A compacted base and suitable material depth are important. A 4 inch DG layer should not be treated as a universal driveway specification. Follow local construction guidance and supplier recommendations for the full base and surface design.

Standard, Stabilized, and Wax Polymer Decomposed Granite

Not all decomposed granite products are intended for the same applications.

Standard Decomposed Granite

Standard DG is a natural material made from weathered granite. It is commonly used for garden paths, landscaping, and ground cover.

Its stability depends on the particle sizes, moisture, compaction, and preparation of the base.

Stabilized Decomposed Granite

Stabilized DG contains a stabilizing additive that helps bind the particles together. It can be useful for paths and other areas where a firmer surface is desired.

Follow the manufacturer’s mixing and installation instructions because stabilized products may have different requirements.

Wax Polymer Decomposed Granite

Wax polymer products use a polymer or wax based binder to help hold the material together. They are designed for particular landscaping and pathway applications.

Check the product instructions before estimating or ordering because different products may have different densities and installation specifications.

What Affects the Amount of Decomposed Granite You Need?

Even when two projects have the same dimensions, their material requirements may differ.

Material Density

A denser DG product weighs more than a lighter product with the same volume. This affects the estimated tonnage and the amount delivered by a supplier.

Moisture Content

Wet material can weigh more than dry material. Ask your supplier whether its quoted density is based on dry, loose, or compacted material.

Compaction

Compaction reduces the volume of loose material as it settles into a firmer layer. The amount of extra material required depends on the product and installation method.

Uneven Ground

Slopes, low spots, and irregular surfaces can require more material than a simple length and width calculation suggests.

Waste and Spillage

Some material may be lost during handling, spreading, and installation. Including a reasonable waste allowance helps reduce the chance of ordering too little.

Frequently Asked Questions

How much does 1 cubic yard of decomposed granite weigh?

A common planning estimate is approximately 2,430 pounds per cubic yard, based on a density of 90 pounds per cubic foot. Actual weight can vary with the product and moisture content, so check with your supplier.

How many square feet will 1 ton of decomposed granite cover?

At a 1 inch finished depth, one US ton may cover approximately 267 square feet before allowances when using a density of 90 pounds per cubic foot. With 15% compaction and 5% waste allowances, the estimated coverage is about 221 square feet.

Coverage decreases as the layer gets deeper.

How many tons of decomposed granite do I need for 1,000 square feet?

The answer depends on your desired depth and material density. For example, at 2 inches deep and 90 pounds per cubic foot, 1,000 square feet requires approximately 13.89 cubic yards of finished volume.

With 15% compaction and 5% waste allowances, the order volume is approximately 16.77 cubic yards, weighing about 20.5 US tons.

Is decomposed granite sold by the ton or cubic yard?

Bulk decomposed granite may be sold by weight or volume, depending on the supplier. Bagged products are generally sold by bag weight. Always confirm the supplier’s unit and material density before ordering.

How much extra decomposed granite should I order?

A compaction allowance of 10% to 20% and a separate small waste allowance can be useful starting points for estimates. The correct amount depends on the product, base preparation, and installation conditions.

Can I use this calculator for circular garden beds?

Yes. Select the circle option and enter the diameter. The calculator uses the circular area formula to estimate the required decomposed granite.

Can I calculate several areas at once?

Yes. Select Add Another Area and enter the measurements for each section. The calculator combines the areas before calculating the total material requirement.

Does the calculator work with metric measurements?

Yes. Select Metric to enter measurements in meters and centimeters and receive volume and weight estimates in metric units.

How do I estimate the cost of decomposed granite?

Enter the supplier’s price and choose whether it is charged per ton, cubic yard, or bag. You can also include a delivery fee and material sales tax to estimate the total cost.

Is decomposed granite suitable for a driveway?

It can be used in some driveway applications, but the correct design depends on vehicle loads, soil, drainage, base preparation, and the particular DG product. Follow professional installation guidance rather than relying on surface depth alone.

Get Your Decomposed Granite Estimate

Planning a pathway, patio, garden bed, or driveway is easier when you know how much material to order. Use the Decomposed Granite Calculator above to enter your measurements, choose a depth, select the material density, and include compaction and waste allowances.

You can estimate cubic yards, tons, bags, coverage, and material costs in one place. For the most accurate order, compare your result with the density and selling units provided by your local supplier.